Proposal Details 5-10 plus 2

Machine

The DMS Freedom machine is an industrial-quality 3-axis 5′ x 10′ moving gantry CNC router with 15″ of Z-axis travel and is capable of maximum rapid feed rates of 1,200 inches per minute.

Machine Construction

DMS Freedom machines are constructed of a rigid, fabricated steel base, utilizing heavy gauge steel tube and plate weldment construction throughout. All structural members are stress relieved for maximum stability, and all surfaces that mount precision components are precision ground and/or machined.

Spindle

Customers may choose from several industrial quality spindle options including wrench style collet spindles and push-button automatic tool change spindles.

X-Axis

The X-axis is the bridge axis and moves left to right. The heavy duty bridge will span the 60 inch dimension. Actual stroke is 72 inches. Maximum feed rate is 800 inches per minute. Bridge rails are 30 mm profiled ways with recirculating ball bearings. The X-axis is driven by a 32mm recirculating ball screw assembly. The ball screw spins and is supported on each end by angular contact bearings.

Y-Axis

The Y-axis is the gantry axis and moves front to back. The gantry spans the 60 inch left-to-right table dimension, and travels the 120 inch front-to-back table dimension. The total stroke is 121 inches. Maximum feed rate is 800 inches per minute. The table rails are 30 mm profiled ways with recirculating ball bearings. The Y-axis is driven by a 40mm recirculating ball screw assembly. The ball screw spins and is supported on each end by angular contact bearings.

Z-Axis

The Z-axis is ball screw driven and supported by air cylinder counter balances.

Model Number

The DMS Freedom 5′ x 10’ 3-Axis CNC Router, model number F37-5-10-15xxxxP (final model # established upon PO)

Industrial Controls System

Fagor 8070 3-axes CNC Controller fully compatible with CAD/CAM software and featuring a color 7.5″ LCD monitor, 1 MB base memory, 512 MB compact flash Drive, 3D graphics, TCP / IP Ethernet, USB and serial port connections, and a complete set of Fagor manuals on CD. Controller is driven by Fagor closed-loop brushless AC servo motors and servo amplifiers on all axes.

Utilities

Power requirements for machine only
220 Volts, 3-Phase, 60 HZ. Amps are determined by final machine configuration. (1-phase option available for purchase)

Compressed air requirements

5 CFM at 90 PSI (Static) Note: tool change spindles require a minimum of 95 PSI to ensure proper tool release. Additional air devices will change CFM requirements. Customer is responsible for providing the compressed air.

Dust collection

Recommend 1,000 CFM at the spindle. Dust collection is not required for all machines. Client may choose to purchase a dust collector and/or piping system as an option. The client is responsible for the installation, hoses and service connections.

Vacuum

Vacuum is not required for all machines. Client may choose to purchase a vacuum pump as an option. The client is responsible for the installation, hoses and service connections.

Installation & Basic Operator Training

DMS Freedom machine set-ups are performed at the customer site by DMS certified technicians. New customers must select from one of three available Machine installation options. Installation & Training Option 1: One (1) day of installation and two (2) days of basic operator training at the customer’s facility, for a total of three (3) consecutive days. Other set-up options are available. Please inquire with your Sales Representative.