Skip to content

Instant Quote Build

Instant Quote Build

1 Router

2 Power Options

3 Spindles

4 Tables

5 Vacuum Pump

6 Controller Options

7 Accessories

8 Support

9 Summary

Router*
Select Router
- Patriot 4x4 - standard 12” Z
- Patriot 4×8 - standard 12” Z
- Patriot 5×10 - standard 12” Z
- Patriot 5×10 Plus 10” Z
- Patriot 5×10 Plus 15″Z

Power*
Please choose one option.
- 220 volt, 3-phase power
  Standard
- Convert to 220 volt single phase power (Includes upgraded Inverter & wiring)
- Transformer: 480 to 220 volt
- Transformer: 380 to 415 volt

Spindle*
Must choose one option.
Must call factory for ES915 or ES929.
Please Note: 3-phase power is required for 10HP Quick Change Spindles
- 5hp Collet Spindle: 5.1hp/3.9kw 18,000 rpm, short-nose collet spindle (220 volt)
- 9hp Collet Spindle: 9hp/7kw 18,000 rpm, short-nose collet spindle (220/380 volt).
- HSD 5hp Quick-Change Spindle: 5hp/3kw ISO30 18,000 rpm, long-nose spindle (220/380 volt).
- Router will deliver with no spindle for after-purchase customization
Spindle*
Must choose one option.
Must call factory for ES915 or ES929.
Please Note: 3-phase power is required for 10HP Quick Change Spindles
- 5hp Collet Spindle: 5.1hp/3.9kw 18,000 rpm, short-nose collet spindle (220 volt)
- 9hp Collet Spindle: 9hp/7kw 18,000 rpm, short-nose collet spindle (220/380 volt).
- HSD 5hp Quick-Change Spindle: 5hp/3kw ISO30 18,000 rpm, long-nose spindle (220/380 volt).
- Hiteco 10hp Quick-Change Spindle: (220/380 volt).
- HSD 10hp Quick-Change Spindle: 10hp/7.5kw ISO30 24,0000 rpm, long-nose quick change spindle (220/380 volt).
- Router will deliver with no spindle for after-purchase customization

Table*
Please choose one option.
- 4’ x 4’ phenolic table machined flat
- 4’ x 4’ phenolic table machined flat with 3/8” steel threaded inserts on 12” centers
- 4’ x 4’ phenolic table machined flat with 3/8” steel threaded inserts on 6” centers
- 4’ x 4’ phenolic 2-zone vacuum table with 2 ea. 1.50” 2-way ball valves (one per zone)
- 4’ x 4’ phenolic 3-zone vacuum table with 3 ea. 1.50” 2-way ball valves (one per zone)
- 4’ x 4’ phenolic 4-zone vacuum table with 4 ea. 1.50” 2-way ball valves (one per zone)
- 4 x 4’ phenolic table with 3-zone Ortho-Matrix vacuum plenum, in/out plugs & flip fixture mounting
- 4’ x 4’ aluminum table machined flat
- 4’ x 4’ aluminum table machined flat with 3/8” steel threaded inserts on 12” centers
- 4’ x 4’ aluminum table machined flat with 3/8” steel threaded inserts on 6” centers
- 4’ x 4’ aluminum 2-zone vacuum table with 2 ea. 1.50” 2-way ball valves (one per zone)
- 4’ x 4’ aluminum T-slot table on 6” centers
Table*
Please choose one option.
- 4' x 8' phenolic table machined flat
- 4' x 8' phenolic table machined flat with 3/8" steel threaded inserts on 12" centers
- 4' x 8' phenolic table machined flat with 3/8" steel threaded inserts on 6" centers
- 4' x 8' phenolic 2-zone vacuum table with 2 ea. 1.50" 2-way ball valves (one per zone)
- 4' x 8' phenolic 4-zone vacuum table with 4 ea. 1.50" 2-way ball valves (one per zone)
- 4' x 8' phenolic table with Ortho-Matrix vacuum plenum, in/out plugs & flip fixture mounting
- 4' x 8' aluminum table machined flat
- 4' x 8' aluminum table machined flat with 3/8" steel threaded inserts on 12" centers
- 4' x 8' aluminum table machined flat with 3/8" steel threaded inserts on 6" centers
- 4' x 8' aluminum 2-zone vacuum table with 2 ea. 1.50" 2-way ball valves (one per zone)
- 4' x 8' aluminum 4-zone vacuum table with 4 ea. 1.50" 2-way ball valves (one per zone)
- 4' x 8' aluminum T-slot table on 6" centers
Table*
Please choose one option.
- 5' x 10' phenolic table machined flat
- 5' x 10' phenolic table machined flat with 3/8" steel threaded inserts on 12" centers
- 5' x 10' phenolic table machined flat with 3/8" steel threaded inserts on 6" centers
- 5' x 10' phenolic 2-zone vacuum table with 2 ea. 1.50" 2-way ball valves (one per zone)
- 5' x 10' phenolic 7-zone vacuum table with 4 ea. 1.50" 2-way ball valves (one per multiple zones)
- 5' x 10' aluminum table machined flat
- 5' x 10' aluminum table machined flat with 3/8" steel threaded inserts on 12" centers
- 5' x 10' aluminum table machined flat with 3/8" steel threaded inserts on 6" centers
- 5' x 10' aluminum 2-zone vacuum table with 2 ea. 1.50" 2-way ball valves (one per zone)
- 5' x 10' aluminum 7-zone vacuum table with 4 ea. 1.50" 2-way ball valves (one per zone)
- 5' x 10' aluminum T-slot table on 6" centers

Vacuum Pumps & Options
Please choose as many as needed.
- 5hp Becker KVT 3.100 , 66 SCFM, 27” Hg, 208/220/460 volt, 3-ph, 60 HZ
- 5hp Becker KVT 3.80, 48 SCFM, 27” Hg, 220 Volt, 1-Ph, 60 HZ
- 10hp Becker VTLF 2.250 non SK, 174 SCFM, 24” Hg, 208/220/460 volt, 3-ph, 60 Hz Up to 2,000-2,500 Ft elevation
- 15hp Becker VTLF 2.400, 250 SCFM, 24” Hg, 208/230/460 Volt, 3-ph, 60 Hz
- 3" automatic 2-way gate valve
- Low pressure vacuum (LPV) switch (Price per valve)

Controller Options
Please choose as many as needed.
- Fagor 8037 3-axis industrial controller with 7.50" LCD color monitor and stand-alone electrical cabinet
- Hand wheel with axes select (Fagor 100P)
- Fagor component extended warranty (extends from one year to two years)
- Upgrade to Fagor® 8055i-FL 4-axis controller
- 2 GB compact flash (available on 8055i-FL only)

Spindle Options & Accessories
- Air pressure booster. Required if compressed air supply is less than 90 psi.
- Unist mist coolant system for cutting non-ferrous metals. Not for use with dust hood.
- Tangential oscillating knife
- 5-position vertical drill bank, 6,000rpm, 1.7kw, mounted on a fixed plate.
- 5+4 position spindle drill bank, 6,000rpm, 1.7kw, mounted on a fixed plate.
Spindle Options & Accessories
- Air pressure booster. Required if compressed air supply is less than 90 psi.
- Unist mist coolant system for cutting non-ferrous metals. Not for use with dust hood.
- Tangential oscillating knife
- 5-position vertical drill bank, 6,000rpm, 1.7kw, mounted on a fixed plate.
- 5+4 position spindle drill bank, 6,000rpm, 1.7kw, mounted on a fixed plate.
Tool Changers & Accessories
- Standard tooling that comes with spindle
- Automatic tool height sensor (Standard)
- Material thickness sensor
- 8-position automatic tool change rack
- 8 piece tooling package including 8 ea. ISO30 ER32 tool holders with cover-nut, and tightening fixture. Collet sizes included: 2 ea. 1/4", 2 ea. 3/8", 3 ea. 1/2", and 1 ea. 3/4" (Standard)
- 10 piece tooling package including 10 ea. ISO30 ER32 tool holders with cover-nut, and tightening fixture. Collet sizes included: 1 ea. 1/8", 2 ea. 1/4", 3 ea. 3/8", 3 ea. 1/2", and 1 ea. 3/4"
Tool Changers & Accessories
- Standard tooling that comes with spindle
- Automatic tool height sensor (Standard)
- Material thickness sensor
- 8 piece tooling package including 8 ea. ISO30 ER32 tool holders with cover-nut, and tightening fixture. Collet sizes included: 2 ea. 1/4", 2 ea. 3/8", 3 ea. 1/2", and 1 ea. 3/4" (Standard)
- 10-position automatic tool change rack
- 10 piece tooling package including 10 ea. ISO30 ER32 tool holders with cover-nut, and tightening fixture. Collet sizes included: 1 ea. 1/8", 2 ea. 1/4", 3 ea. 3/8", 3 ea. 1/2", and 1 ea. 3/4"
Tool Changers & Accessories
- Standard tooling that comes with spindle
- Automatic tool height sensor (Standard)
- Material thickness sensor
- 8 piece tooling package including 8 ea. ISO30 ER32 tool holders with cover-nut, and tightening fixture. Collet sizes included: 2 ea. 1/4", 2 ea. 3/8", 3 ea. 1/2", and 1 ea. 3/4" (Standard)
- 10-position automatic tool change rack
- 10-position automatic tool change carousel. Includes 8055iFL 4-axis controller upgrade
- 10 piece tooling package including 10 ea. ISO30 ER32 tool holders with cover-nut, and tightening fixture. Collet sizes included: 1 ea. 1/8", 2 ea. 1/4", 3 ea. 3/8", 3 ea. 1/2", and 1 ea. 3/4"
Table Accessories
- Orthotic Flip-Fixture for processing hard plastic arch supports (with ortho table only)
Table Accessories
- Pop-up pins for locating sheet stock (set of four)
- Orthotic Flip-Fixture for processing hard plastic arch supports (with ortho table only)
Dust Collection Options
- Dust collection piping system for 4’ x 4’ models. Dust collector is Not included
Dust Collection Options
- Dust collection piping system for 4’ x 8’ models. Dust collector is Not included
Dust Collection Options
- Dust collection piping system for 5' x 10' models. Dust collector is Not included
Safety Options / Regional Compliance
- CE certification
- NRTL (USA) or CSA (Canada) field evaluations
- Pressure sensitive safety mat (located in front of Workspace 30D x 72W)
- Safety light curtains
- Install safety module & modify PLC to put machine into a cycle stop condition and turn spindle off

Support
- One day on-site machine setup within 100 miles of FMT factory. Includes expenses.
- 1 day on-site machine setup & training. Includes expenses
- 2 day on-site machine setup & training. Includes expenses
- 3 day on-site machine setup & training. Includes expenses
- Factory training for first person (per day)
- Factory training for each additional person (per person, per day)

Don’t worry, this isn’t a sales pitch!
We simply want to get you the most precise cost since this quote is an estimate only.
First Name*
Last Name*
Email*
Email Confirmation*
Company*
Phone*
Address*
State*
State*
State*
State*
Country
Distributor ID (if available)
Shipping
- Arrange my own shipping.
*Price does not include shipping. Shipping zones and method vary per machine model. Please contact factory for a final proposal including shipping costs.